Vehicle
& Armoring Specs:
Armored 2003
Lincoln Navigator – Immaculate Condition!! Level 5 (CEN
B6) High Power Rifle Protection
2003
Lincoln Navigator V8 5.4 liter gasoline engine 4x4
Armored Level 5 (B6/B7) 10,000 Kms (approximately 6,000
miles)
Key
features:
5.4 liter V8 engine 300 Hp, 355 torque. Four-speed
automatic overdrive transmission, 4WD. Auxiliary engine
oil cooler. Four-wheel antilock disc brakes. Independent
front suspension with torsion bars. Driver and right
front-passenger dual-level air bags. Passenger Sensing
System. Eight-passenger seating. Tri-zone temperature
controls. Driver Information Center. AM/FM stereo with
CD and cassette players. Foglamps. Side-mounted assist
steps. Custom leather reclining 40/20/40 split-bench
seat. Second-row 60/40 split-bench seat and third-row
bench. Cruise control. Remote Keyless Entry.
Armor
Protection through Level V (Equivalent CEN B6/B7):
Vehicle armored by ABATE in Mexico, to meet and exceed
44 Magnum, 240 gr. 427 mps / 1470 fps; .357 Magnum, 158
gr. 425 mps / 1450 fps; 9mm 124 gr., 350 mps / 1120 fps;
7.62 X 39mm, 123 gr., 750 mps / 2,697 fps; 223 Caliber,
45 gr., 919 mps / 3,200 fps; 7.62 x 51mm M80, 149 gr.,
830 mps / 2,700 fps; 5.56 x 45 M193
Base
Armoring Specification:
1) Glass areas: Windshield, side glass and rear glass
will be replaced with bullet-resistant transparent armor
multi-layer glass and polycarbonate inner layer to
prevent spalling upon ballistic impact. Glasses are 40mm
thick, curved and contoured to retain the appearance of
the original glass.
2) Driver side window lowers approximately 6”.
3) Body: Doors, pillar posts, side panels, kick-panels,
firewall, and headers (laterals) armored with ballistic
steel and Dyneema, in accordance with defined standard
of defeat. Internal frame overlap system used
throughout.
4) Roof: Armored with ballistic composite material.
5) Floor: Floor areas armored with multi-ply rigid
ballistic fragmentation material, molded to form fit
contours of floor boards and panels. Protection single
German DM51 or US M-67.
6) Vehicle Structured Modifications: Reinforcement of
pillar posts and hinges, high pressure heavy duty
shocks, and upgrade of suspension to include HD torsion
bars, polyurethane bushings. Hardened plastic door
risers installed on all doors.
7) Fuel tank: Protected.
8) Battery: Protected.
9) Electronic control Module (ECM) protection.
10) Modified braking system with hydrobooster.
